Hydro-boost is the clean answer for a 1973-87 GM or GMC C/K square-body that has lost its vacuum to a big cam, a diesel swap or a crowded firewall. This black upper assembly pairs a hydraulic booster with an aluminum dual-port master cylinder and is set up for disc/disc trucks, giving you firm, consistent pedal feel without depending on manifold vacuum.
Why It's Worth It
- Power-steering-driven assist that doesn't fade when vacuum is low
- 1" bore aluminum master cylinder with 2 ports for a proper dual-circuit system
- Black finish for a factory-looking engine bay
- Comes with the bracket and pedal rod extension, so it bolts up as a package
What's Included
- Hydro-boost unit and aluminum master cylinder with cap
- Mounting bracket, brake pedal rod extension and mounting hardware
- Bleeder hoses
Before You Order
- This is the disc/disc version. Trucks with rear drums need the matching disc/drum setup.
- Hydro-boost runs off the power steering pump. Plan the pressure and return hoses, and make sure your pump can handle the extra load.
- After a disc conversion, confirm your proportioning valve suits a four-wheel disc system.
Specifications:
| Bleeder Hoses Included: |
Yes |
| Booster Diaphragm Type: |
Single |
| Bracket Included: |
Yes |
| Brake Pedal Rod Extension Included: |
Yes |
| California Proposition 65: |
Yes |
| Grade Type: |
Black |
| Master Cylinder Bore Size: |
1 |
| Master Cylinder Cap Included: |
Yes |
| Master Cylinder Material: |
Aluminium |
| Master Cylinder Port Quantity: |
2 |
| Mounting Hardware Included: |
Yes |
| Part Type: |
Hydro Boost Booster & Master Cylinder Combo |
Warranty:
The Right Stuff products carry a limited lifetime warranty to be free of defects in material and workmanship. The warranty is void if the product has been altered, improperly installed or used for purposes other than originally intended.