Dinan 18-19 M5 F90, Free Flow Axle-Back Exhaust, Polished Tips, Stainless Steel - (DIN-D660-0079)

Description

Freeflow Axle-Back Exhaust; 304 Stainless Steel Construction; 10 Max Horsepower Gain At 6600 RPM; 8 lbs.-ft. Max Torque Gain; 4 in. Diameter Polished And Laser Engraved Tips;

In order to achieve desired sound volume and tone Dinan felt the tubing was enlarged to 83 mm. (vs 80 mm. stock) to allow freer flow throughout the entirety of the system. The larger tubing is fed into a muffler that is typical of all Dinan exhaust design and utilizes absorption and reactive technologies designed to impr ove exhaust flow and reduce back pressure. The combination results in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. This is partly courtesy of the retained computer controlled exhaust valves that limit noise during low speed driving and open fully during high-load conditions to allow free flow and greater sound as the bulk of the gases are bypassing the muffler. Like all Dinan exhausts, our M5 free flow exhaust is engineered to reduce low-RPM drone so the cabin o

Features & Benefits

• Enjoyably Louder / Sportier Sound
• Valves Are 30 Percent Less Restrictive Than The OE Valves
• Easy Bolt-On Installation w/Included Mounting Hardware
• Tips Masterfully Fill Up And Accentuate Upon The Factory Cut-Outs
• Increases Power Output And Provides Great Sporty Sound
• Tubing Utilizes Absorption And Reactive Technologies
• Larger Diameter Piping For Increased Flow / 83 / 80 mm.
• Stock Exhaust Valve Actuators Are Reused
• Operation Of Exhaust Valve Is Unchanged
• Computer Controlled Exhaust Valves Are Retained
• Valves Are Open Fully During High-Load Conditions
• Twin Secondary Exhaust Valves w/Whopping 76 mm. Diameter

Specifications:

Exhaust Type:	Axle-Back
Material:	304S Stainless Steel
Part Type:	Exhaust System Kit
Tip Diameter:	4.000 in.