Holley 05-20 Challenger/Charger, Holley Dual Fuel Pump Module System, 525 LPH - (HOL-12-176)

Description

Holley Dual Fuel Pump Module System; Free Flow GPH 20; True Twin LPH 525; 2200 EFI HP; Billet Aluminum/Steel; Black/Silver;

The new Holley fuel system for the 2005-20 Challenger/Charger with Gen III Hemi is a true dual pump design. The saddle tank design in the late model Challenger, Charger and other musclecar platforms can be a limiting factor for road course duties. Most aftermarket systems suggest that you have to have 1/2 to 3/4 of a tank of fuel to race without potential fuel pressure loss in the turns. Holley has designed a system with a 255 or a 525 LPH pump for both sending units in the fuel tank. The design eliminates the factory jet pump and includes a HydraMat on each new pump module to prevent fuel starvation with only 2 gallons of fuel in your tank. The 12-154 supports up to 1100 EFI HP. The 12-176 modules support up to 2200 EFI HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw). The OEM jet pump diverts more than 20 GPH to sweep fuel from the secondary side since this is the only way to access fuel from this side. This fuel is only recycled for the jet pump and takes away from useable fuel delivery to the engine. There is no functional use for the jet pump in the Holley system since we return fuel from each regulator directly above each of the HydraMats. The amazing HydraMat(R) is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution!

Features & Benefits

• Two 525 lph Pump Modules
• Re-Uses Factory Fuel Level Sender
• Removes Parasitic Factory Jet Pump Secondary Transfer System
• HydraMat/Pump/Regulator On Each Side Of Saddle Tank
• Can Be Configured As Return Style Or Returnless
• Billet Aluminum

Specifications:

Part Type:	Fuel Pump Module Assembly