B&M 66-91 Ford C6 Nitrous Holeshot 3800 Torque Converter, 3500-3800 RPM - (BM-40477)

Description

Nitrous Holeshot 3800 Torque Converter; 3800 RPM Stall; 1.38 in. Crank Pilot;

B& M Nitrous HoleShot 3800 stall for Ford C6 transmissions is an excellent choice for vehicles with engine modifications, particularly big cams that tend to reduce low end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Nitrous Holeshot converters feature furnace brazed impeller and turbine, new precision steel alloy pump drive tube, new heavy duty needle bearings between the stator and impeller (not a thrust washer) and needle bearings between the stator and turbine. Other features include a new turbine hub, new springs and rollers in the stator and anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower a nitrous plate system delivers. This converter has an 11.437 inch bolt circle and a 1.375 inch crank pilot. Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Fits vehicles with Ford C-6 Automatic Transmission

Features & Benefits

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• New Turbine Hub
• New Springs/Rollers In Stator

Specifications:

Part Type:	Automatic Transmission Torque Converter
Anti Balloon Plate:	Yes
Bolt Circle Diameter:	11.4375 in.
Mounting Stud:	Yes
Package Contents:	Torque Converter, Mounting Hardware
Torque Converter Series:	Nitrous Holeshot
Transmission Model:	C6
Automotive Item Grade:	High Performance
Crank Pilot Diameter:	1.380 in.
Lock Up Type:	No
Stall Speed (RPM):	3500-3800
Trans Model:	Ford- C- 6 (Auto) 3 Speed