Holley EFI Sniper Returnless Master EFI Kit Self-Tuning 4150 4bbl TB w/Monitor, Gold - (EFI-550-516D)

Description

Sniper EFI Self-Tuning Master Kit; 4150 Flange Carb Replacement/Handheld Monitor/EFI Hose/Fuel Pump/Post And Pre Fuel Filters/Return Bulkhead/Fittings/Hardware; Gold Finish;

Introducing Sniper EFI Master Kits, with a Returnless Drop-in Retrofit Fuel Module. These kits combine the Sniper EFI Self Learning Throttle Body, with an easy to install In-Tank Retrofit Returnless Fuel Module, 20 ft. of Earl's Vapor Guard Fuel Hose, and the required fittings. The included fuel system places a 340 LPH fuel pump in the tank, which can easily be accomplished with basic hand tools. The Returnless Drop-in Master kits make plumbing your Sniper EFI installation as hassle free as possible by locating the fuel pressure regulator in the fuel tank, thus eliminating the need to run a fuel return line from the engine bay, back to the fuel tank. Simply cap the regulator on the Sniper EFI throttle body with the provided -6 AN cap, safely route the Earls' Vapor Guard fuel line along the chassis to the die cast fuel hat, and the job is finished.

Features & Benefits

• Throttle Body Mounted ECU
• Supports Up To 650HP w/Four 100 lb/hr. Injectors
• 4 Wire Vehicle Connection Battery +/Battery -/Switch Ignition/RPM
• Calibration Wizard - No Laptop Required
• Self-Tuning ECU Means You Dont Have To Be A Computer/Tuning Wiz
• No External Fuel Return Line Required
• Incl. Retrofit Returnless Fuel Module/20ft. Vapor Guard Fuel Hose
• Incl. 5 Hose Clamps/Post Filter/Earls Fittings and Caps
• Bosch LSU 4.9 Wideband O2 Sensor Provides Realtime Fuel Map Learn

Specifications:

Part Type:	Fuel Injection Conversion Kit
CFM:	800
Flange Type:	Dual Bolt Pattern
Maximum Horsepower:	650
Pressure:	58.5 PSI
Finish:	Classic Gold
Injector Size:	100 lb/hr @ 58.5 PSI
MAP Sensor:	2 Bar
Transmission Model:	TH350