X-CELerator Intake Manifold; Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;
This Weiand X-CELerator manifold was specifically designed with the IMCA racer in mind. It is fully legal for use in IMCA Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
DescriptionTeam G Intake Manifold; Power Band 2800-7200 RPM; High Rise; Square Carb Mounting Flange; 3.63 in. Front H/4.56 in. Rear Height; Satin Finish;This manifold is part of the Weiand Nostalgia...
DescriptionTeam G Intake Manifold; Power Band 3000-8200 RPM; High Rise; Square Carb Mounting Flange; 5.63 in. Front H/6.56 in. Rear Height; Satin Finish;This manifold is part of the Weiand Nostalgia...
DescriptionStealth Intake Manifold; Power Band Idle-6800 RPM; IMCA Legal; High Rise; Square Carb Mounting Flange; 4.37 in. Front H/5.06 in. Rear Height; No EGR Provisions; Satin Finish;This manifold...
DescriptionX-CELerator Intake Manifold; Power Band 1500-7000 RPM; Low Rise; w/2V Heads; Square Carb Mounting Flange; 4.28 in. Front H/5.36 in. Rear Height; Satin Finish;This manifold is part of the...
DescriptionStealth Intake Manifold; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;This manifold is part...