Flowmaster 74-79 Corvette w/350ci, Force II Crossmember-Back Exhaust System - (FLO-817661)

* This product is part of the HolleyDays Promotion, 10% has been taken off of the normal price and the promotion price is shown above. This price is valid until December 29th. *

Description

Force II Crossmember-Back Exhaust System; Dual; Dual Rear Exit; 2.25 in. Tubing; Incl. 60 Series Delta Flow Muffler/3.0 in. Angle Cut Round Polished Tips; 409 Stainless Steel;

Flowmaster's Force II Crossmember-back system for the 1974-1979 Chevrolet Corvette is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out the Rear) system for the 5.7L V8 features specially tuned stainless steel 60 Series Delta Flow mufflers, a Scavenger X-pipe assembly and 2.25" 409S stainless steel tailpipes. Like all Flowmaster systems, the pipes are all mandrel bent to reduce any restrictions and maximize performance. The system finishes with 3.00" polished 304S stainless steel tips. The exhaust system is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Intended for Off Road Use Only on 1975-1979 Models. Fits 1974-1979 Chevrolet Corvette with 350 Cubic inch engine. (Not Emissions Legal for 1975-1979 Vehicles).

Features & Benefits

• Mandrel Bent 16 Gauge 409 Stainless Steel Tubing
• Patented Delta Flow Technology
• Limited Lifetime Warranty
• Mild to Moderate Exterior Exhaust Tone
• Incl. Hangers and Hardware For Easy Installation
• Crossmember Back System
• Dual Out Rear Exit
• Premium Flowmaster Quality
• Stainless Steel Construction
• Dyno Tuned for Maximum Performance

Specifications:

Material:	Stainless Steel
Part Type:	Exhaust System Kit
Color:	Black
Exhaust Type:	Dual
Exit Style:	Straight
Inlet Diameter:	2.250 in.
Muffler Count:	2
Muffler Series:	60 Series Delta Flow
Outlet Outside Diameter:	3.000 in.
Single or Dual:	Dual
System Type:	Crossmember Back
Tip Cut:	Angle
Tip Edge Style:	Cut
Tip Length:	4.750 in.
Tip Material:	Stainless Steel
Tip Shape:	Round
Tubing Diameter:	2.250 in.
Catalytic Converter Included:	No
Exhaust Series:	Force II
Exit Position:	Dual Rear
Heat Shield Attached:	No
Inlet Inside Diameter:	2.250 in.
Mount Type:	Flanged
Muffler Part Number:	Kit Only
Muffler Type:	Welded Baffle
Outlet Diameter:	2.500 in.
Shape:	Oval
Sound Level:	Mild/Moderate
Tail Pipe Diameter:	2.250 in.
Tip Diameter:	3.000 in.
Tip Finish:	Polished
Tip Logo:	Embossed
Tip Quantity:	2
Tip Type:	Single Wall

Warranty:

Limited Lifetime