B&M 70-82 Ford C4 Holeshot 2000 Torque Converter, 1800-2200 RPM Stall - (BM-50448)

* This product is part of the HolleyDays Promotion, 10% has been taken off of the normal price and the promotion price is shown above. This price is valid until December 29th. *

Description

Holeshot 2000 Torque Converter; 1900 - 2100 RPM Stall; 26 Spline C4 Trans;

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised. Fits 1970 to 1982 Ford; Lincoln and Mercury C4 automatic transmissions. Uses a 10.5 inch bolt pattern and accepts a 26 splined shaft and 1.375 inch crank pilot.

Features & Benefits

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• New Turbine Hub
• New Springs/Rollers In Stator

Specifications:

Material:	Steel
Bolt Circle Diameter:	10.500 in.
Furnace-Brazed:	Yes
Stall Speed (RPM):	1900-2100
Trans Year:	1971
Automotive Item Grade:	High Performance
Input Shaft Spline Quantity:	26
Trans Model:	Ford- C- 4 (Auto) 3 Speed
Part Type:	Automatic Transmission Torque Converter