Flowmaster 16-21 Camaro SS w/6.2L, Outlaw Series Axle Back Exhaust System - (FLO-817745)

* This product is part of the HolleyDays Promotion, 10% has been taken off of the normal price and the promotion price is shown above. This price is valid until December 29th. *

Description

Outlaw Series Axle Back Exhaust System; Dual; Dual Rear Exit; Incl. 4 in. Tubing/Outlaw Muffler/4 in. Logo Embossed Black Polished Tips; 409 Stainless Steel;

Flowmaster's Outlaw Axle-back exhaust system for the 2016-2018 Chevrolet Camaro SS Coupe and Convertible is perfect for the person looking for a very aggressive exhaust tone inside and outside the vehicle, with all of the performance benefits that you would expect from Flowmaster. This easy to bolt-on emissions-legal system for the 6.2L V8 features a pair of 409S stainless steel Outlaw Series mufflers with 3.0in stainless steel mandrel bent pipes. The system finishes off with 4.0in polished black PVD coated stainless steel tips. This system does not fit models with the Performance Exhaust Option. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. The exhaust system is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Automatic transmission models include active exhaust valves that operate while in MDS mode. These valves are retained with this system. Fits 2016-2018 Camaro SS with 6.2L Engine. Does NOT Fit Vehicles Fitted With Performance Exhaust Option (Quad Tip).

Features & Benefits

• Mandrel Bent 16ga 409 Stainless Tubing
• Limited Lifetime Warranty
• Aggressive And Powerful Exterior Exhaust Tone
• Incl. Hangers and Hardware For Easy Installation
• Axle Back System
• Dual Out Rear Exit
• Dyno Tuned for Maximum Performance
• Race Proven Technology
• Made in the USA

Specifications:

Part Type:	Exhaust System Kit
Material:	Stainless Steel
Catalytic Converter Included:	No
Exhaust Series:	Outlaw
Exit Position:	Dual Rear
Heat Shield Attached:	No
Inlet Inside Diameter:	4.000 in.
Mount Type:	Uses Factory Hangers
Muffler Part Number:	Kit Only
Outlet Outside Diameter:	4.000 in.
Single or Dual:	Dual
System Type:	Axle Back
Tip Cut:	Angle
Tip Edge Style:	Cut
Tip Length:	5.250 in.
Tip Material:	304S Stainless Steel
Tip Shape:	Round
Tubing Diameter:	3.000 in.
Color:	Black
Exhaust Type:	Dual
Exit Style:	Straight
Inlet Diameter:	3.500 in.
Muffler Count:	2
Muffler Type:	Welded Baffle
Outlet Diameter:	3.000 in.
Shape:	Oval
Sound Level:	Aggressive
Tail Pipe Diameter:	4.000 in.
Tip Diameter:	4.000 in.
Tip Finish:	Black PVD
Tip Logo:	Embossed
Tip Quantity:	2
Tip Type:	Double Wall
Tubing Material:	Stainless Steel

Warranty:

Limited Lifetime