The Right Stuff Disc/Disc Proportioning Valve & Bracket Kit - PVK72

Put discs on all four corners and the old disc/drum proportioning valve has to go; it's built to feed drums, not rear calipers. The Right Stuff disc/disc proportioning valve and bracket kit is built for four-wheel disc systems, and the brass valve comes with its mounting bracket so it installs cleanly instead of hanging off the lines.

Why It's Worth It

• Set up for disc/disc brake systems
• Brass body with 2 inlet ports for a dual-circuit master cylinder
• Mounting bracket included for a solid, clean install
• Helps balance front and rear braking after a four-wheel disc conversion

What's Included

• Brass disc/disc proportioning valve
• Mounting bracket

Before You Order

• This is a disc/disc valve; use a disc/drum valve if your rear drums are staying.
• Check your line routing and fitting sizes; you may need new hard lines to reach the valve's ports.
• Pair it with a dual-reservoir master cylinder.

Specifications:

Inlet Port Quantity:	2
Material:	Brass
Mounting Bracket Included:	Yes
Part Type:	Brake Proportioning Valve

Warranty:

The Right Stuff products carry a limited lifetime warranty to be free of defects in material and workmanship. The warranty is void if the product has been altered, improperly installed or used for purposes other than originally intended.