Front drums on a 1964-72 Chevelle are fine until the first hard stop from highway speed. This Right Stuff Street Series kit converts the front of the A-body to 11" discs and adds a 9" power booster with a matching dual-reservoir master, so you get real assisted braking without scrounging junkyard spindles and calipers.

Why It's Worth It

• 11" front rotors with single-piston calipers - the classic GM disc setup, done with new parts.
• New spindles included, so the conversion bolts on at stock ride height rather than needing a swap from a factory disc car.
• 9" single-diaphragm booster paired with a 1-1/8" bore master cylinder for firm, predictable pedal feel.
• Two-port master separates front and rear circuits, a major safety step over an original single-pot.
• Booster/master finish offered in Original, Chrome or Black; calipers in Natural, Black or Red.

What's Included

• Front rotors, calipers, pads, brackets, hoses and mounting hardware
• New spindles
• 9" power booster and 1.125" bore master cylinder

Before You Order

• Needs 15" or larger wheels, or 14" wheels that cleared factory disc brakes.
• Included spindles push each front wheel out 3/8" versus stock - check tire clearance.
• Front-only kit: a front-disc/rear-drum car needs the correct proportioning valve; confirm your valve before driving it.

Specifications:

Booster Diaphragm Type:	Single
Booster Housing Diameter:	9 IN
Brake Activation:	Power
Brake Booster Included:	Yes
Caliper Piston Quantity:	1
Fits Wheel Size:	15"+ or 14" with Factory Disc Brakes IN
Front Rotor Diameter:	11 IN
Master Cylinder Bore Size:	1.125 IN
Master Cylinder Included:	Yes
Master Cylinder Port Quantity:	2
Pads Included:	Yes
Part Type:	Front Disc Brake Conversion Kit
Series:	Street
Spindles Included:	Yes
Vehicle Ride Height:	Stock Height
Disclaimer:	The new spindles included in this kit will push the wheels outwards by 3/8 inch more than stock

Warranty:

The Right Stuff products carry a limited lifetime warranty to be free of defects in material and workmanship. The warranty is void if the product has been altered, improperly installed or used for purposes other than originally intended.